RT 5.0.7 Documentation

RT::Action::CreateTickets

NAME

RT::Action::CreateTickets - Create one or more tickets according to an externally supplied template

SYNOPSIS

 ===Create-Ticket: codereview
 Subject: Code review for {$Tickets{'TOP'}->Subject}
 Depended-On-By: TOP
 Content: Someone has created a ticket. you should review and approve it,
 so they can finish their work
 ENDOFCONTENT

DESCRIPTION

The CreateTickets ScripAction allows you to create automated workflows in RT, creating new tickets in response to actions and conditions from other tickets.

Format

CreateTickets uses the RT template configured in the scrip as a template for an ordered set of tickets to create. The basic format is as follows:

 ===Create-Ticket: identifier
 Param: Value
 Param2: Value
 Param3: Value
 Content: Blah
 blah
 blah
 ENDOFCONTENT
 ===Create-Ticket: id2
 Param: Value
 Content: Blah
 ENDOFCONTENT

As shown, you can put one or more ===Create-Ticket: sections in a template. Each ===Create-Ticket: section is evaluated as its own Text::Template object, which means that you can embed snippets of Perl inside the Text::Template using {} delimiters, but that such sections absolutely can not span a ===Create-Ticket: boundary.

Note that each Value must come right after the Param on the same line. The Content: param can extend over multiple lines, but the text of the first line must start right after Content:. Don't try to start your Content: section with a newline.

After each ticket is created, it's stuffed into a hash called %Tickets making it available during the creation of other tickets during the same ScripAction. The hash key for each ticket is create-[identifier], where [identifier] is the value you put after ===Create-Ticket:. The hash is prepopulated with the ticket which triggered the ScripAction as $Tickets{'TOP'}. You can also access that ticket using the shorthand TOP.

A simple example:

 ===Create-Ticket: codereview
 Subject: Code review for {$Tickets{'TOP'}->Subject}
 Depended-On-By: TOP
 Content: Someone has created a ticket. you should review and approve it,
 so they can finish their work
 ENDOFCONTENT

A convoluted example:

 ===Create-Ticket: approval
 { # Find out who the administrators of the group called "HR" 
   # of which the creator of this ticket is a member
    my $name = "HR";

    my $groups = RT::Groups->new(RT->SystemUser);
    $groups->LimitToUserDefinedGroups();
    $groups->Limit(FIELD => "Name", OPERATOR => "=", VALUE => $name, CASESENSITIVE => 0);
    $groups->WithMember($TransactionObj->CreatorObj->Id);

    my $groupid = $groups->First->Id;

    my $adminccs = RT::Users->new(RT->SystemUser);
    $adminccs->WhoHaveRight(
        Right => "AdminGroup",
        Object =>$groups->First,
        IncludeSystemRights => undef,
        IncludeSuperusers => 0,
        IncludeSubgroupMembers => 0,
    );

     our @admins;
     while (my $admin = $adminccs->Next) {
         push (@admins, $admin->EmailAddress);
     }
 }
 Queue: ___Approvals
 Type: approval
 AdminCc: {join ("\nAdminCc: ",@admins) }
 Depended-On-By: TOP
 Refers-To: TOP
 Subject: Approval for ticket: {$Tickets{"TOP"}->Id} - {$Tickets{"TOP"}->Subject}
 Due: {time + 86400}
 Content-Type: text/plain
 Content: Your approval is requested for the ticket {$Tickets{"TOP"}->Id}: {$Tickets{"TOP"}->Subject}
 Blah
 Blah
 ENDOFCONTENT
 ===Create-Ticket: two
 Subject: Manager approval
 Type: approval
 Depended-On-By: TOP
 Refers-To: {$Tickets{"create-approval"}->Id}
 Queue: ___Approvals
 Content-Type: text/plain
 Content: Your approval is required for this ticket, too.
 ENDOFCONTENT

As shown above, you can include a block with Perl code to set up some values for the new tickets. If you want to access a variable in the template section after the block, you must scope it with our rather than my. Just as with other RT templates, you can also include Perl code in the template sections using {}.

SkipCreate

This flag allows for ticket creation to be skipped programmatically. Taking a look at the example above the template creates two different tickets, maybe a second approval ticket shouldn't be created if the ticket's priority is low. Using Perl logic we can check some information about the ticket and decide using this flag if we should skip creating this ticket:

 ===Create-Ticket: two
 SkipCreate: {$Tickets{'TOP'}->PriorityAsString eq 'Low' ? 1 : 0}
 Subject: Manager approval
 Type: approval
 Depended-On-By: TOP
 Refers-To: {$Tickets{"create-approval"}->Id}
 Queue: ___Approvals
 Content-Type: text/plain
 Content: Your approval is required for this ticket, too.
 ENDOFCONTENT

Acceptable Fields

A complete list of acceptable fields:

    *  Queue           => Name or id# of a queue
       Subject         => A text string
     ! Status          => A valid status. Defaults to 'new'
       SLA             => A valid SLA level
       Due             => Dates can be specified in seconds since the epoch
                          to be handled literally or in a semi-free textual
                          format which RT will attempt to parse.
       Starts          =>
       Started         =>
       Resolved        =>
       Owner           => Username or id of an RT user who can and should own
                          this ticket; forces the owner if necessary
   +   Requestor       => Email address
   +   Cc              => Email address
   +   AdminCc         => Email address
   +   RequestorGroup  => Group name
   +   CcGroup         => Group name
   +   AdminCcGroup    => Group name
       TimeWorked      =>
       TimeEstimated   =>
       TimeLeft        =>
       InitialPriority =>
       FinalPriority   =>
       Type            =>
    +! DependsOn       =>
    +! DependedOnBy    =>
    +! RefersTo        =>
    +! ReferredToBy    =>
    +! Members         =>
    +! MemberOf        =>
       Content         => Content. Can extend to multiple lines. Everything
                          within a template after a Content: header is treated
                          as content until we hit a line containing only
                          ENDOFCONTENT
       ContentType     => the content-type of the Content field.  Defaults to
                          'text/plain'
       UpdateType      => 'correspond' or 'comment'; used in conjunction with
                          'content' if this is an update.  Defaults to
                          'correspond'

       CustomField-<id#> => custom field value
       CF-name           => custom field value
       CustomField-name  => custom field value

       SkipCreate        => 0/1, if true, skip this create ticket block

Fields marked with an * are required.

Fields marked with a + may have multiple values, simply by repeating the field-name on a new line with an additional value.

Fields marked with a ! have processing postponed until after all tickets in the same actions are created. Except for Status, those fields can also take a ticket name within the same action (i.e. the identifiers after ===Create-Ticket:), instead of raw ticket ID numbers.

When parsed, field names are converted to lowercase and have hyphens stripped. Refers-To, RefersTo, refersto, refers-to and r-e-f-er-s-tO will all be treated as the same thing.

METHODS

Parse

Takes (in order) template content, a default queue, a default requestor, and active (a boolean flag).

Parses a template in the template content, defaulting queue and requestor if unspecified in the template to the values provided as arguments.

If the active flag is true, then we'll use Text::Template to parse the templates, allowing you to embed active Perl in your templates.

_ParseMultilineTemplate

Parses mulitline templates. Things like:

 ===Create-Ticket: ...

Takes the same arguments as "Parse".

_ParseXSVTemplate

Parses a tab or comma delimited template. Should only ever be called by "Parse".

← Back to index

Security contact information
© 2002-2024 Best Practical Solutions LLC.